We've all seen it, the infamous "Bass Boost" button. It's most prevalent in aftermarket car stereo head units, boom booxes & self powered PA speakers. Sounds fun right? Boost bass, f***ing a! We're all about that these days... right??? (remember though, louder is not better) I'm about to tell you the actual purpose of the Bass Boost button or switch in some cases, you'll realize why it shouldn't be used all the time and furthermore, why it's specifically designed for certain listening situations based off of the way our brain and ears work together!
It's purpose all ties into the Fletcher Munson Curve and how the human ear perceives sound. To give you a real quick run down. At lower amplitudes(volume) the human ear picks up on mid-range frequencies much better than it responds to low and high frequency information. This is because we've evolved to hear human speech which lies in the mid-range of the frequency spectrum. Communication is how we've been able to get to where we are as a species and our ear's perception of sound is just another confirmation of this thought. Conversely, at high amplitudes, we hear the mid-range with less accuracy. At high volumes the ear picks up on the low end and high end of the frequency spectrum with much more intensity than at lower volumes. Long Story short, when it's quiet you don't hear the bass and highs, when it's loud the bass and highs are so loud they drown out the mid-range. 83dB is said to be the ideal monitoring level to take advantage of the most accurate level of our ears perception. If you can't have a normal conversation over the music it's most likely over 83dB.
Now that we know a little bit more about how our ear's hear we can get back to the Bass Boost button. It's supposed to be used when you're listening to music at lower volume levels. Remember from above that at low volume levels we don't hear the low end and high end as well. When you engage the Bass Boost button on a system it gives a little EQ boost to the low and high end of the material it's processing. Now you understand why this feature is quite handy when you're playing stuff at a lower level. Our ears can then perceive a more accurate representation of the original song even when it's quiet. However, if the switch is engaged at a high volume you're really messing stuff up. Our ears already hear lows and highs better at screaming loud levels so if you have the Bass Boost button engaged you'll only be adding to the natural problem our ear's posses.
The Bass Boost button is known as many other names such as: contour, boost, hi boost, low boost and probably a billion other clever little marketing names manufactures have came up with. In the title picture you can see Ampeg has decided to call their system the ultra system and they've given you the option to increase either the highs or lows independently. Bottom line, look for it, be aware of it, and next time your raging face with your friends slapping beats loud enough to wake the neighbors don't hit that button, you don't need it, your ears are already doing that work for you!
Showing posts with label Fletcher Munson Curve. Show all posts
Showing posts with label Fletcher Munson Curve. Show all posts
Monday, September 27, 2010
Saturday, February 27, 2010
The Fletcher Munson Curve & Why You Should Know About It
In the 1930's two scientists at Bell Labs named Harvey Fletcher and Wilden Munson came to the conclusion that the way humans hear specific frequencies is in fact much more complicated than anyone had previously thought. They developed the Fletcher Munson Curve, which helps us to see how frequencies are perceived. Humans do not hear the entire frequency range at the same loudness level. Furthermore; as amplitude changes, so does our ears response to the frequency spectrum. In other words certain parts of the frequency spectrum (lows, mids, highs) may seem louder to us than others, and when amplitude (volume) increases or decreases our ears hear these frequencies at different loudness levels. For example; as you turn your system louder, bass and treble sounds will increase while the mid-range frequencies will begin to get drown out. This will make more sense after we look at an Equal-Loudness Contour graph. While Fletcher & Munson were the first to create the Equal-Loudness Contour, today we use a different contour compiled from a much broader test group of subjects. The idea is still the same though, and most Equal-Loudness Contours are still refereed to as a Fletcher Munson Curves at present time.
Equal-Loudness Contour Graph

The Y axis represents Sound Pressure Level (dB SPL) or volume, in simple terms. The X Axis represents the frequency range. Phons are simply a term used to rate equal loudness. As you can see, our ears are most responsive to the middle range of the frequency spectrum. Most likely because, this is where human speech occurs in the frequency range. (score one for evolution) At lower volumes you can't hear all of the frequency range at the same level. Mids are exaggerated while bass and high frequencies are not heard as well. At higher volumes the curve begins to flatten out and we begin to hear at a flatter response than we did at lower volumes. If you're still having trouble understanding this whole idea, the following real world example may help you out. Have you ever seen the "Bass Boost" button on an amplifier or car stereo? The purpose of this button isn't to blast bass. In fact, it's actually meant to be used when listening at low volumes, and its existence can be directly contributed to the Fletcher Munson Curve. The bass boost setting is something like an EQ that amplifies low and high frequencies so we can hear them more in line with the middle range frequencies at low volumes.
If it's not obvious by now, the level your monitoring your productions or mixes at is extremely important. If you're monitoring at to low of a level (usually never a problem for most beat freaks) the mid range of the frequency spectrum is going to be louder so you're going to end up compensating for this by cranking the low and high end of your project. If you're monitoring at too loud of a level the bass is going to begin drowning out the mid range and the high end of the spectrum will be ripping through your ears. So... What's the best level to monitor at? It's widely accepted that right around 80-85 dB SPL is the best spot to work at. At this level our ear's frequency response is just about as flat as is humanly possible. The best way to ensure that you're monitoring at this level is to get a dB SPL meter (buy & return or rent one, if you're broke like me) Once you have one of these you can mark on your interface or mixer where 83 dB SPL roughly lies. That way you're always sure you're hearing everything that exists in your project.
Hopefully this whole concept makes a little more sense now. Now, go take this idea back to the lab with you. Thanks again for reading
Understanding Audio: Getting the Most Out of Your Project or Professional Recording Studio
Principles of Vibration and Sound
Equal-Loudness Contour Graph

The Y axis represents Sound Pressure Level (dB SPL) or volume, in simple terms. The X Axis represents the frequency range. Phons are simply a term used to rate equal loudness. As you can see, our ears are most responsive to the middle range of the frequency spectrum. Most likely because, this is where human speech occurs in the frequency range. (score one for evolution) At lower volumes you can't hear all of the frequency range at the same level. Mids are exaggerated while bass and high frequencies are not heard as well. At higher volumes the curve begins to flatten out and we begin to hear at a flatter response than we did at lower volumes. If you're still having trouble understanding this whole idea, the following real world example may help you out. Have you ever seen the "Bass Boost" button on an amplifier or car stereo? The purpose of this button isn't to blast bass. In fact, it's actually meant to be used when listening at low volumes, and its existence can be directly contributed to the Fletcher Munson Curve. The bass boost setting is something like an EQ that amplifies low and high frequencies so we can hear them more in line with the middle range frequencies at low volumes.
If it's not obvious by now, the level your monitoring your productions or mixes at is extremely important. If you're monitoring at to low of a level (usually never a problem for most beat freaks) the mid range of the frequency spectrum is going to be louder so you're going to end up compensating for this by cranking the low and high end of your project. If you're monitoring at too loud of a level the bass is going to begin drowning out the mid range and the high end of the spectrum will be ripping through your ears. So... What's the best level to monitor at? It's widely accepted that right around 80-85 dB SPL is the best spot to work at. At this level our ear's frequency response is just about as flat as is humanly possible. The best way to ensure that you're monitoring at this level is to get a dB SPL meter (buy & return or rent one, if you're broke like me) Once you have one of these you can mark on your interface or mixer where 83 dB SPL roughly lies. That way you're always sure you're hearing everything that exists in your project.
Hopefully this whole concept makes a little more sense now. Now, go take this idea back to the lab with you. Thanks again for reading
Understanding Audio: Getting the Most Out of Your Project or Professional Recording Studio
Principles of Vibration and Sound
Subscribe to:
Posts (Atom)
